cooling flow meaning in Chinese
冷却流
Examples
- Adjust cooling flow and water flow ( water ) according to operating data
根据操作参数调节冷却水量和水流量。 - And , the cooling flow rate of the clearance between stator and rotor as well as the hole of rotor flange was obtained
获得了静盘与转盘间隙以及转盘外缘小孔的冷气流量。 - The flow characteristics of rotor - stator cavity system with blade - cooling flow and disk - cooling flow was experimentally studied
摘要采用实验方法，对具有中心进气、两个出口的盘腔系统的流动特性进行了研究。 - The experimental results show that : the blade cooling flow rate will increase with the total flow rate and rotating speed ; the ratio of the blade - cooling flow rate to the total flow rate will increase with decline of the total flow rate , and increases with the rotating speed
结果表明：盘面出流孔的流量随总流量或转速的增加而增加，该流量与总流量的流量比随总流量的增加而降低，随着转速增加而增加盘。 - Measurements were made of system pressure , mass flow rate of steam , air , and cooling water , temperatures of condensing flow and cooling flow , and the water level of boiler . the major phenomena observed in the present experiment are similar to those by other investigators . the mass flow rate of steam , the system pressure and air content are the most important factors affecting steam condensation
实验结果表明，维持二次侧冷却水流量不变，无论对于纯净蒸汽还是含有空气的蒸汽冷凝，随着蒸汽发生器加热功率的增大(即蒸汽流量增大) ，有效冷凝段长度将加长；当蒸汽中含有少量空气，有效冷凝段长度也会明显加长；提高系统压力，有效冷凝段长度将缩短。